Getting To Know Remote Control Toys
_gas-rc-nitro-car-truck.jpg_traxxas-jato3-3.jpg_traxxas-nitro-tec-4.jpg_traxxas-stampede-4x4-vxl.jpg

Traxxas Slash VXL Brushless Wheelies And Jumps

Traxxas slash that is brushless and popping wheelies

25 Responses to “Traxxas Slash VXL Brushless Wheelies And Jumps”

  1. MiikeeL93 says:

    wire harness (lets you connect 2 batteries) and a extra battery same as the one that comes with the slash, if you do this install the pinion gear which is included with the truck and it will reach 50+ mph for about £25 extra, hope this helps :)

  2. jonesy1507 says:

    hm does a brushless system cost for the slash

  3. yamaharider575 says:

    @elementality360 a second stock battery and a split wire thing that plugs both in and you get more power

  4. iracechevys says:

    Since when is that cheap, especially for the 2WD considering I just bought the 4×4 for 389.99 with a 2.4GHz Radio System and Velenion system. Get your facts straight.

  5. funpun11 says:

    if you want it cheap you can get it at hobby people for $300

  6. elementality360 says:

    im getting a slash soon, and i was wondering what an easy/ cheap upgrade would be?
    thanks

  7. monsterGAUZ says:

    very nice. what us the price of this slash vxl??

  8. gmodertom says:

    what gearing does this have?

  9. aleinlegs says:

    i KNOW the slash is MAD tough with the brushed motor, but is it still durable under the speeds of the brushless motor??

  10. crushgear64 says:

    2s lipo?

  11. 502ServerErrorPro says:

    cool, how much does it cost though

  12. raptor700boy34 says:

    i cnt wait till the 4wd brushlss slash comes out, they pushed the date back tho, it was supposed to be april

  13. 73rx3 says:

    look at my other vids

  14. SkateboardingAndrew says:

    u need wheelie bars but nice vid

  15. jr9950 says:

    What fun, banging the rear bumper over and over into the ground…

  16. i8yomama says:

    i would have to say this car is not a stable car..

  17. mattcommnet says:

    maybe your spur gear is on its way out… make sure you have your spur meshed with your pinion properly.. If you are running a 3s LiPo w/ the 3500 velineon system you will wheelie @ 40+mph roll on’s. Make sure you know how to adjust the slipper, make sure its meshed properly, if not you have bigger issues

  18. cycle2deth says:

    dont you just love 3S lipo’s with some brushless in there?

  19. phoenixfire47 says:

    Sweet video. Sometimes I get wheelies especially with my dirt paws off road(by pro line) but I run Sidewinder 5700 and 7 cell 4500mAh NiMH by Orion. Soon to have a 3S Zippy Flightmax battery.

  20. 67shelbyman says:

    what batteries are you running?

  21. laplante42 says:

    you have to have 2 of the large spacers in each rear shock. at least i think so

  22. vineshvijayan says:

    my mistake … 1/4 turn… any advice

  23. vineshvijayan says:

    Hi got the same stock slash with VXL, i use 7 cell pretty good speed but no wheelies. I recently got a 3 cell lipo too the speed is very good but still no wheelies. However it makes a loud whining noise when it goes on full throttle, so i though it cud be the slipper and adjusted that too to /4 turn from full closed, but still no wheelies :( any adive.

  24. 95666 says:

    sweet vid dude! i just got my slash doin crazy wheelies also, im using a castle sidewinder esc and a castle 4600kv motor on 3s lipo, oh yeah, 5 stars.

  25. traxxasslash23 says:

    he just changed the gearing system it comes with truck

Leave a Reply

Get Adobe Flash playerPlugin by wpburn.com wordpress themes