Getting To Know Remote Control Toys
_gas-rc-nitro-car-truck.jpg_traxxas-jato3-3.jpg_traxxas-nitro-tec-4.jpg_traxxas-stampede-4x4-vxl.jpg

Traxxas Slash VXL at the Beach

Check out www.RCAddicts.info and www.MySlashTruck.com. Just a few pics of my friends Mini E-Revo VXL and my Traxxas Slash VXL and HPI Wheely King and some video of my Slash on the beach. The Proline Moab Tires in the rear hooked up amazingly! I thought the M3 compound would hookup, but never this well!

Video Rating: 3 / 5

A good look into my Traxxas Slash ,all my mods i have done ,please enjoy PLEASE LEAVE COMMENTS AND TELL ME WHAT YOU THINK….. PLEASE SEE MY OTHER SLASH MOD VIDS

Video Rating: 4 / 5

50 Responses to “Traxxas Slash VXL at the Beach”

  1. VideoGamePlayer12 says:

    @TheSantacruzmtb The slash 4×4 labled Slash 4×4 VXL is a 1/16th truck, that means it is significantly smaller.

    All the other ones (Slash 4×4, Slash 4×4 Platinum Edition and the Slash 4×4 Ultimate)are basically the same truck, in a larger 1/10th scale version except that the standard slash 4×4 has plastic parts and a controller, platinum has aluminum upgrades on it but no controller, and the ultimate has aluminum and a controller

  2. 88gators325 says:

    @BrandonANDBrantonTV Because it would be useless to have a pair of paddles just laying around when I dont go to the beach very often, let alone with my rigs.

  3. BrandonANDBrantonTV says:

    why didnt u just get a pair of paddles for it?

  4. NitroPTY says:

    nice slash 1/10

  5. TheSantacruzmtb says:

    @88gators325 sweet thanks

  6. 88gators325 says:

    @chubbychaser5 You see thats what I was afraid of when I was going to drive my truck on there. So I just grabbed a piece of cloth and hot glued it over the opening so it can still breath but not let much sand in. Did sand get in? Yes, but very minimal, and wasnt too bad to clean up even though I had to take apart the beadlock (what a PITA that was).

  7. 88gators325 says:

    @TheSantacruzmtb There are 3 Versions of the 4×4. The RTR, The Platinum, & The Ultimate. Do you mean the RTR and Ultimate? Beacuse all 3 are VXLs. The RTR is the base kit. The platinum comes with all the goodies, a clear body & doesnt come with a radio or battery or charger, so you can throw in your gear of your choice right off the bat. The Ultimate is the same thing as the Plat, except it comes with a prepainted body & comes with radio gear, a 7C battery & a cheap charger (just like the RTR).

  8. TheSantacruzmtb says:

    PLEASE enlighten me. I can’t find it anywhere. What is the difference between a Traxxas Slash 4×4 VXL and a Traxxas Slash 4×4 Ultimate?
    Why aren’t VXL’s on their website? Or are they…

  9. chubbychaser5 says:

    i brought my mini erevo to the beeach it it fucked up my wheels . i now plug up the hole in the rim to prevent sand entering.

  10. newyorkyankeef4n1018 says:

    the blue looks nice

  11. ProChrist says:

    Best was. WATCH OUT BIRD!!!

  12. 88gators325 says:

    @rcanton1l1 Look at 0:42

  13. rcanton1l1 says:

    what battery are you runing??
    and what gearing??

  14. Rockumup2122 says:

    this isnt paralyzer

  15. 88gators325 says:

    I honestly have no clue. Loctite it and see if it helps.

  16. afatbird0123 says:

    do u no why with a 25t pinion it comes off coz i have the same problem with my brushless e revo which is geared 19/65

  17. RichmanzHOOD says:

    holy shit that’s me and my dad at 1:40 of part two in florida, that’s unbelievable but that was a while ago.

  18. KTMBOY1112 says:

    @joshjr03 Seether-Fine Again

  19. joshjr03 says:

    wats the song?

  20. cyborgfish99 says:

    No, but it would be smart to buy one when driving on concrete.

  21. 88gators325 says:

    @VannilaThunder, The slash does not come with a wheely bar, it comes with a rear bumper.

  22. VannilaThunder says:

    does slash have a stock wheely bar

  23. 88gators325 says:

    @BCK1970 No they are not Robinson Racing ones. They are Traxxas ones. Jato 56T Spur Gear and Emaxx 14/15t Pinion gears. Just divide the spur by the pinion to get the gear ratio and try to match the gear ratio the best you can with a 48P Gear ratio. So for 23/86 48P would = 15/56 32P.

  24. BCK1970 says:

    32 pitch gears? Are those the Robinson Racing ones? I am about to install a Velineon system in my Slash with paddles and Mohawks. I’ve thought about all of the spurs I’m gonna shred and the RR setup might not be bad! LOL.

  25. 88gators325 says:

    Nope, not at all. But I was also using a RPM Gear Cover at the time. Now I’m running 32P Gears w/out the gear cover because it wont fit with 32P Gears. But definitely a great upgrade.

  26. PANABA453 says:

    IIf you want to archive that kind of speed ,you need to go brushless and lipos ,what do you plan to do wither your truck , race on a track or a street rocket if you plan on racing ,speed is you worst enemy especially 50 +

  27. monkeymens2010 says:

    hey i have a stock slash and i want it to 50 and it goes 30 any thoughts.besides a lipo a bushless motor.i live at the cinders in az i want good tires to have traction. give me some advice please.thanks joey

  28. mrfreakazoid11 says:

    do you have a video of u driving it?

  29. PANABA453 says:

    ZIPPY TIES i ldo ove them

  30. mrfreakazoid11 says:

    how do you do the little mud guards so well mine suck Ive tried like 3 times

  31. mrfreakazoid11 says:

    how did u do the little mud guards so well mine sucked

  32. PANABA453 says:

    For your information .the lights are still working after 2 years now .

  33. spiracncrawlin says:

    the first time tht truck hits a jump and jumps short those lights on the bottom r gone

  34. theshyguitarist says:

    5:30 —- Number 69 baby! Gotta lot goin……cmon man. Ya gotta finish your thoughts. ; )

  35. pdhemming says:

    was that a toilet paper tube?

  36. headster86 says:

    I love it !!! very nice I bet it halls and looks sweet at night. I run a 1/16 slash I dont have the room like that :( but ideas are flowing

  37. pdloojsks says:

    those are stampede tires

  38. XBIGTIM says:

    awesome dude just got my brushles tht sweet like the lights

  39. Previous1Next2 says:

    i used paracord for my clip holders haha

  40. PANABA453 says:

    That will be hard to do , since I sold it a year ago

  41. ordy101 says:

    what a retard u put the tires on the rear backwards… take them off and switch them

  42. buttdud1122 says:

    ya… you dont wont the velineon motor to exceed 170 if you want it to last….

  43. 126Countryboyx says:

    Thank you.

  44. PANABA453 says:

    149.00 for the vxl setup and 160.00 for the maxamp battery

  45. dodgedartman123 says:

    how much was the brushless system? with battery>

  46. 1000paulreedsmith says:

    you should get a new chasie i got a lower one and it does not roll any more the rest of the car is rpm and proline nothing is stock on it. if you what to see it tell me and i will make a video. the chassie is fiberglass

  47. PANABA453 says:

    I use Hpi Blitz tires, there belted tires. It stops the tires from expanding .

  48. 126Countryboyx says:

    i have a slash vxl and lipo. but its ripped to stock tires in half. what do you recommend a tire i should use?

  49. jjbird1023 says:

    @PANABA453 were did you get the light and boides from

  50. PANABA453 says:

    I HAVE A NEW SET OF LED LIGHTS I CAN SELL YOU

Leave a Reply

Get Adobe Flash playerPlugin by wpburn.com wordpress themes