Suggestions On Building Model Planes

Posts Tagged ‘PLANES’

Suggestions On Building Model Planes

Saturday, January 14th, 2012

Suggestions On Building Model Planes

Free Online Articles Directory

Why Submit Articles?
Top Authors
Top Articles
FAQ
AB Answers

Publish Article

0 && $.browser.msie ) {
var ie_version = parseInt($.browser.version);
if(ie_version Hello Guest
Login

Email

Password

Remember me?
Lost Password?

Home Page > Home and Family > Suggestions On Building Model Planes

Suggestions On Building Model Planes

Edit Article |

Posted: Dec 27, 2010 |

]]>

As a hobbyist it could be an enjoyable pastime to build your own model plane. Here are some suggestions for creating a better-looking plastic model plane. These suggestions will assist you to develop plastic model planes.

1. When you get your model plane kit be certain that you wash all the parts correctly with soap and water as plastic parts are made by injection molding and are covered with a chemical which is used to release the parts from the injection mold. If not removed by washing, this chemical will stop proper paint adhesion to the model. Dry the parts utilizing a hair dryer after you wash them.

2. The 1st thing to assemble and paint should be the cockpit as this would be enclosed permanently inside the fuselage halves and it’ll be practically impossible to paint it later.

three. Use only a minimum amount of glue. You should try utilizing only a thin line of glue around the fuselage and on the sides of the wings. When you locate it challenging to control the amount of glue, try utilizing a pin for applying it. If not controlled throughout application excess glue will form lumps on the external surface that can require finishing with sandpaper.

4. Alignment is of paramount importance throughout assembly. All your efforts is going to be in vain if the result is really a crooked airplane. The wings and tail should be perfectly aligned with the fuselage. The very best way would be to use tape for holding the massive pieces together to check their alignment before glue is applied.

5. A lot of times you’ll be able to observe gaps between the pieces that have been glued together. Much more normally such gaps will be found between the fuselage halves or at joints between the wings and the fuselage. Just fill these gaps with putty or super glue and finish the surface with sandpaper once the filler dries out.

6. (a) If you are brush painting your model plane ensure that that you might have a minimum of three brush sizes, wide medium and fine with you just before you begin painting. Never overlap brush strokes or try repainting any area that is still wet. If another coat is necessary, wait until the very first coat dries out prior to applying the next 1. Whenever you finish painting clean your brushes with thinner and stack them upright in some old tin or cup.

(b) When painting with spray cans you might obtain that the flow slows down after some time. This is because the can cools down. The remedy is to place the can in warm water for about ten minutes just before using it again.

(c) Though a bit pricey, when you have an airbrush it is most effective as it’ll let you control the paint volume and air pressure letting you paint fine lines as desired.

7. The clear plastic canopy of your model plane has a frame that needs to be painted. A great way would be to cover the whole canopy with masking tape and use a sharp blade to cut and remove the tape only from the frame, which can then be painted and left to dry. After the paint dries, remove the rest of the tape from the canopy.

8. Apply a coat of clear gloss overcoat over the paint to give your plane a shiny look. Once the gloss coat dries, it is possible to apply the decals, which will now look much greater on the glossy surface. It the plane has a naturally flat surface you may apply a clear flat coat after you apply the decals.

Victor Epand is an expert consultant for model planes and model cars. You’ll be able to obtain the best marketplace for model planes and model cars by visiting the best websites for model planes , model fighter planes, and model cars .

Retrieved from “http://www.articlesbase.com/home-and-family-articles/suggestions-on-building-model-planes-3925343.html”

(ArticlesBase SC #3925343)

Liked this article? Click here to publish it on your website or blog, it’s free and easy!

Guy Casey -
About the Author:

Guy Casey is an avid railroad and aircraft modeler. He has experience modeling in the popular scale, his favorite scale, because of the realistic quality in such a small scale. But, he also has experience in other scales such as O and N scales. Casey’s passion is to provide more information to the internet so others can learn more about this great hobby.
You can find more information in Casey’s Model Building website.

]]>

Questions and Answers

Ask our experts your Home and Family related questions here…200 Characters left

What do you suggest banana or apple for the one who do body building?
I just recently bought an older cushman golf cart. am interested in restoring it. looking for electrical wire diagrams-Marked model 218. any suggestions welcome. thank tou,emilia
I need softwares for g five – g3000 model mobile phone.pls suggest the website to download the softwares

Rate this Article

1
2
3
4
5

vote(s)
0 vote(s)

Feedback
RSS
Print
Email
Re-Publish

Source: http://www.articlesbase.com/home-and-family-articles/suggestions-on-building-model-planes-3925343.html

Article Tags:
rc planes for sale, wall painting, plastic model kits, painting tips

Posts Tagged ‘PLANES’

Suggestions On Building Model Planes

Search Google

Search Fast Gas Remote Control

Recent Search Terms

Random Search Terms

Popular Search Terms

Popular Posts

Tags