Getting To Know Remote Control Toys
_gas-rc-nitro-car-truck.jpg_traxxas-jato3-3.jpg_traxxas-nitro-tec-4.jpg_traxxas-stampede-4x4-vxl.jpg

revo 3.3 driving

a day out with my revo 3.3

Video Rating: 4 / 5

traxxas revo ripping around on snow (gets stuck and crashes)

Video Rating: 5 / 5

22 Responses to “revo 3.3 driving”

  1. 7stefan7vn says:

    there is a little wire that goes to the glow plug and when you try start it EZ start system sends a spark to the glow plug.

  2. samthefireman14 says:

    ?dont u need a glow plug igniter with the ez start?

  3. 7stefan7vn says:

    This is right beside the skate park at the Forks

  4. CrazyFM says:

    Where were you in the city I seen down town in the background but I don’t recognize the location?

  5. 7stefan7vn says:

    oh ok and its better for me 2 no what u actually think of the video

  6. drawingslim says:

    I was talking about your intro.
    so much for any comment is better tahn nothing huh?

  7. 7stefan7vn says:

    thats wat its called retard

  8. drawingslim says:

    perhaps “revo 3.3 driving” would be a more appropriate title

  9. 7stefan7vn says:

    wow good thinking there.

  10. whath3fL1P says:

    first comment, lol
    get a new body to replace that old one

  11. slashbasher96 says:

    @Owebaby11 they say they do but the only thing to really make it a limited slip would be a higher weight diff oil

  12. zipline140 says:

    Put paddles on that thing, it will go WAY better in snow!

  13. l9a9n9 says:

    dude what i did to water proof mine is i took all the individual servos and the opti drive and the receiver and i put sensor safe silicone insiside around the cracks and put fluid film directly on all of the circuit boards, and for all of this winter i havnt had any of them crap out… it works awesome!!! plus i made a pre-filter out of an old sock so snow didnt get in and freeze in the filter causing a loss of power, oh one more thing i cut of the end of an old sock to put over the cooling head

  14. jayc888x says:

    i did not do much but as soon as i was done i airred it out with a blowdryer and took the lides off of the recever and servo boxes. also u know thoes little pacages that come in boxes to keep stuff fresh that say (DO NOT EAT THROW AWAY) if you put thoes in the recever box and it works like a deumidafire

  15. Owebaby11 says:

    lol.. i guess it’s not just my truck. i made snow chains for mine, i can’t wait until we get our snow tonight( i hope) . :) )) it will be fun. what did you do to protect your electrocnics. i am putting ducktape around the cut outs in the body along the wheels. hope that helps, but i am making sure to leave enought to allow air for the engine.

  16. jayc888x says:

    oh ya myne does that

  17. Owebaby11 says:

    it’s not diff slip. it is a type of diff that when one wheel spins the other gets power. with a non limited slip diff. or a standard diff once one wheel gets spinning it gets all the power, and you get stuck.

  18. jayc888x says:

    no i dont think revos have diff slip?? but my revo runs 4wd al the time. i dont think it should the difrentals should slip. I would take the diff off and make sure the noches arnt worn> :)

  19. Owebaby11 says:

    Do the new revo 3.3 have limited slip differentials ( and i know i can’t spell). mine will spin two wheels, and after about 3/8 throttle it will then spin all fours.

  20. DaMXFreak says:

    thanks bro its good to see other people on youtube who actualyy use these things for puposes other than to be haters lets go bro!

  21. jayc888x says:

    i like your video man Revo 3.3s are so awsome lol

  22. DaMXFreak says:

    woot woot first comment yeah! nice watch my vid too! lol :P

Leave a Reply

Get Adobe Flash playerPlugin by wpburn.com wordpress themes