Here is my first really big project.(before I build my real dune buggy) Its a custom build twin engine monster truck, totally made from the highest quality 7075 aluminum. powered by two XTM 24-7 pro engines (over 2,5 hp each). The acceleration is sick as you can see in this video. I built it 2003-2004 when I was 16 years old. Total cost 30 000 SEK or 00
Check out Squirrels forum! forums.thetoyz.com This is a RC setup guide series to show you 21 points of adjustment and tuning on any 1 and 1/10th scale RC. This guide can be used on electric, nitro, or any scale at all. This video deals with How to adjust your throttle servo so that you…
2 much power
i would invest in a wheelie bar
@bigmikie Those are XTM 24.7 Pro motors
i have the XTM 24.7 non pro motor, they look identical except for the black block.
haha du är ju dum! köper en jävla radiostyrd bil för 30k :O sen typ kör sönder den..x)
nice truck man cum check mine out
very nice truck ,got some power ,mines single engine 4wd ,i cant control it
Thats crazy. What type of motors are those?
The intro music made me throw up in my mouf a bit…
Awesome RC truck.
That monster need a wheelie bar.
this is the realist r/c there is /// u need 2 build me 1
that is the shit!!!
great rc man !! EPIC
Not a sensitive enough throttle finger more likely.
Wanna bet i can get it to ride without wheelies.
its to fast to control, you can only pull weelies…
Hur fan pallar du och var får du pengarna ifrån? oO
aprender a dirigir o caralho tu nao ta vendo uma potencia Dessa porra se Fosse tu la tu nem saberia acelerar
learn how to drive.
thats awesome lol
wish traxxas or hpi made these
keep that engineering spark alive, it runs through my veins… put your engineering mind into use
how much hp it has?
This shit has more power than my mom’s station wagon.
this thing probably has so much torque..
my erevo brushless would smash on this thing…..but this is still cool!
Get some wheelie bars on the back dude! That’ll save a lot of repairing
your broke your toy.
Well, which Hitec servos would you recommend for my jato 2.5r?
@LoveJesusLoveJehovah that is what traxxas uses. I prefer others but that will work
Is the Traxxas 2055 High Torque Servo made for both steerig & throttle. As Modelsport lists only this part?
@LoveJesusLoveJehovah I would get a good servo like the Hitec line. The cheap ones will fail pretty quick. If they will not take it back then you might as well cut your losses.
Sorry I forget to tell you that my Jato is the old jato 2.5 racing engine with the older transmitter tq transmitter & receivers. It’s at east 2-3 years old. It’s not a new 24Ghz type of radio although I wish it was!
They aren’t the traxxas servos. I think I will buy the original traxxas servos from modelsport & then hope that someone will be able to help me. I bought it from modelsport Otley but they said they had too many repairs & they always say that whenever I ring them as though they won’t repair it for me for a charge. They wouldn’t even explain for me proerply how to do it. You or someone else on youtube are my last source of help really. Thanks again if you can help i any way
Hi squirrel. I hve a Traxxas Jato 3.3. My steering struggles turnung wheels left, slowly & not as well or as much as urning right. Also I ramed it into a pavement & find it the Throttle servo cracked. It doesn’t accelerate away. So I buy a new servo. But realize I need to buy another one. Reason being because modelsport told me to use poor steering servo for throttle & use new servo for steering. They wouldn’t take it in otley & fix for charge. How do I install servo, setup, align etc… thanks
@TraxxasNoobie Losi 8ight
hey squirrelod lovin the vids verry helpfull info
just a quick question what buggy are u using in the video?
my engine wont start for some reason do u know y
Hey squirrel-I know this is off topic-but I just got my new BL451&BL351-and the 3pk fasst system-can I charge my servo batteries and receiver battery with my 4 volt quick charger even though the receiver has a 1.5 max amps regulator of some sort and only allows 1.5 amps to come in-would the quick charger still be functional with this system?-Thanks and keep up the great work!
what do you mean by picking up the throttle servo thanks for your help im having the same problem were my truck roars and moves forward in idle i put everything to stcok needl settings and i put my throttle trim to 0 but still does thanks
i have a problem at neutral idle is fine no clutch engagement and carb is at 1mm. after i brake however, the carb twitches and opens around 3 mm and the car goes walkies alone. pls help!
@diblysound82 its probably flooding
hey squirrelod i have a problem on my nitro buggy 1:10..everytime i remove the igniter after i start, the engine dies..what do you think is the problem..? thanks man..
mt mgt 8.0 doesnt idle well, it always shuts off do i adjust the throttle or idle screw
Per the video- Idle screw
what if my truggy runs perfectly but when ever i apply the break it shuts off
Squirrel THIS VID IS AWESOME!
yes
Hwy whats up ? i got a nitro tc3 and just put in my reciver and radio and i need to adjust the servo but the sterring servo is a pain to get to can i set the servo with the horn still on the servo just disconect everything else but leave the servo horn on cause the horn to take off i need to take off the front end
can i turn the idle in on a savage xl so when i hit the break it does not turn off
during break in
i have the same problem…. plz help
is it electric or nitro? If its nitro, I cant really help you much cuz I have never bought or driven one.
please help man, whenever i turn on my truggy it goes fast in a split second all by itself! whats wrong? it didnt have that problem before and all of a sudden it does