Link: www.atomicmods.com This is a 5 minute preview of our comprehensive 30 minute “Stack Like a Pro – Mini-Z FET Stacking Video Tutorial” which you will find on our web site at the link above. Here at AtomicMods we have stacked more than 5000 FETs, which we are sure is more than anyone else on mother earth. As a result we have developed fast and reliable methods to stack FETs that work every time. This Video Tutorial DVD lets you in on all of our secrets, by showing you exactly how we stack FETs day in and day out here at AtomicMods. So you too can “Stack Like a Pro”.
Video Rating: 4 / 5
Saftey glasses are for little kids that buy xmods and might hurt themselves. People that own 1/10 chassis dont need saftey glasses to work on their cars.
Stop at 0:37 AUCCHH
At 1:00 you start sounding like Bob Ross. LOL
safetyglasses are for pussies…
@offroadrc just because you are stupid and lucky does not mean that you are setting a precedent for how its done right. Safety glasses? totally not necessary unless you are extra stupid, but ventilation or at least a fan blowing the fumes away is a definately a good idea. Its easy to act cavalier about it, but give it a few more years when you are laying there dying. And all you had to do was wear your PPE.
har du det bra?
better power enhance the voltage
Would you do the same thing for a xmod?
you do know that solder fumes also give people cancer. Do not intake the fumes.. later
To allow for a motor that requires more power to be installed, if you was to install a motor that draws to much power from the stock fets they will fry and fry your board.
What are the benefits of adding more fets to a mini-z?
1 safetyclasses: i never use these when soldering.
2: tin coses cancer: i i’am soldering 17 years now.
the rest is up to you.
Yes, you need to keep in mind which direction the writing faces. (ex: if writing is upside down, then install the new fets with their writing upside down)
Can i do this on an asf board? As you know what it has 4 fets on both sides of the board. If i use the same fets how should i place them?
and the v2 board for the xmods
why did you guys get rid of the 4c lithiom ion batterys
why did you guys get rid of the 4c lithiom ion batterys
LOL it would be hilarious if that board exploded in your face. I’d ROFL
Now I know how to solder FETS.. But I think that telling your friends what MOSFET stands for is still more impressive…
Yes, making a race worthy car requires more than just FETs. Take a look at the AtomicBuilt section of our site to see what it takes to have a winning car.- Rob
So it is to make this spin faster, but doesn’t the suspension of the car need to change also? For example, changing speed, will not help much if the steering doesn’t react fast in a narrow curb.
Well the purpose of upgrading the FETs is to pass more current from the batteries to the motor, and that is a good thing. 4 FETs pass twice as much current as 2, plus the 4562 is stronger than the factort FETs, so it is a huge improvement in durability and performance, with no drawbacks at all, unless of course you count more crashes due to faster speeds a negative. – Rob
Yeah I know, but doesn’t it damage the piece? Putting too much current can burn it?
Just the opposite my friend, a bigger wire can pass more current. – Rob
2:13 Doesn’t putting too much can create resistance?