Brought to you by www.UltimateRC.com Electric 1/8th Buggy A-main race of the day at Norcal Hobbies in Union City, California
How to disassemble this rc buggy. Replacing a universal joint. Pulling out the motor and gearbox. Suspension arm repair. Tuning screws. users.ncable.net.au
@Petepecs I used a mp9 with Castle Creations mamba monster w/2200kv truggy motor. The gearing is a 14t pinion and a 46t spur. That setup has tons of torque and alot of top end.
Awesome to see such a high standard of racing in the 1/8th electric genre. To the winning buggy, what electrics and gearing were you running for this race?
This track is absolutely perfect!! Also, i love the electric buggies.. so peaceful! =]
i love when races are like that.. close and friendly.. 1st place driver stopped when the 2nd place driver flipped.. thats kool
@FLUFFINATORofCA Get the RC8E, the Ve8 has problems with its Battery Tray Size and its plastic chassis. Maybe another buggy to check out is the Ofna Hyper 9e.
i want to get one of these i was wodering rc8e vs ve8
@UltimateRCnetwork
Makes sense I guess. If you lay the track out the right way you should be able avoid having people run into the wiring too.
Having it above-ground lets them keep it out of the elements on off-days, and also makes it much easier to make layout changes during the season.
Cool track. I was suprised to see the loop on the top of the track vs. burying it in the ground. Maybe they had issues with laps counting?
Yep and he won it! I put one of the flips in my other video from this day.
The track is great. Someone said there was a bet to see who could backflip and land it 5 times for $20.
That was a great video and even better racing!! I want to drive on a track like that!!
Kevin Jelich lost his car again he was in second, his car dies a lot for some reason
Nice battles going on there…;)
”I hope you get your parts for free” (Y) Nice battle of the 2 guys from start till middle somewhere.
Hi is the front drive shafts 80mm pin to pin because i have lots my ones ?
i have one of these buggys and i lost the front drive shaft and its FUCKING anoying to control, once you get the wobblys they just get wider until you spin out of control….i think the last time i was out of control i done three front flips and that was on tare!
crap hsp
@nerfmaster95
if u do u can brake the dog bones esy take of slowley dirt u will u just do dounuts i have a vid
ive just got a warhead and when i start it up its rev,s are really high
i dont seem to be able to slow it down with the transmitter anyone any ideas
Thanks im only 12 and on my atomic warhead the spur gear was stripped and i took everythink off and replaceing the spur gear without my parents knowing AND IM ONLY 12
your carb is loose to mate !!!
woow, how many turns out from full closed did you have your high speed needle valve?
its poking out of the barrel:O.
my warhead was 3 and a half turns out for break in and it wasnt poking out of the barrell like that?
yeah thats an annoying thing, my gear cogs always strip, and then i cant pull apart the gearbox as the allen screws are done so tight so so then they strip meaning i need a whole new gearbox, my other buggy with metal cogs are much better.
?
how did your strip just out of interest
amy whinehouse in the backround lol.
:P.
i dont lik her to be honest
Sure can. Not as much traction but it still works fine.
if you do lose the front drive shaft can u still use it as a rwd?
change the wires on the buggy. swap the throttle and steering wires in the receiver they usually just clip or push?pull in or out
lol
can anyone help me please just got a warhead and the transmitter is playing up the wheel on the transmitter does the throttle and the throttle on the transmitter does the steering its driving me mad
lol nice scrathed chassis
Default plastic gears, my exhaust was black too, ground clearance…maybe 15 to 20mm from memory.
Another question. Do these have default metal gears, whats is its ground clearance and the one im looking at has a black exshaust instead of metal like in your video, doesit make any difference
Look at the gearbox video to see adjustment screw for gear change.
Yes they are good fun but break easily but can be easily repaired. Dont know any other buggys. No idea what speed.
Looking for some help. I have one of these cars and it has just started to fail to shift into 2nd gear. any advice as to what the problem may be.
Are these nitro buggies any good. Because i want to buy one for christmas and im looking on ebay. Which nitro buggie do you think is best. And what speed does it get up to.
Mate you have seriously saved my ass with this vid and your others. Seriously without some of your advice my car would be very broken by now, cheers for the uploads!
could anyone tell what is the best settings fo this car
i hope you tightened up the carby.i double checked every nut,bolt&screw before i even started mine.