This is a 670mm Graupner-Discus that was actually built as a toy-glider… It’s made from EPP and powered by a Pichler nano Outrunner-Brushless with a total-weight of only 9g including the wires. The motor is supplied by a 3-cell Kokam LiPo-Pack with a capacity of 250mAh. It’s recommended not to use it with more than 2 LiPo-cells, but I haven’t ever had any problems using 3 cells. It reaches about 9 min. of full-power flight-time.
Video Rating: 4 / 5
This is an official video made for www.Prolineracing.com. Once there, check out the items and use a 10% discount code- “SQRL10″. If you are looking for a great forum then check out forums.thetoyz.com Squirrel’s YouTube Video Playlists www.youtube.com This video is a large video series…
Video Rating: 4 / 5
@threedeeman Ich hab auch schon Sachen gesehen, wo die ganzen Flächen um die Querachse gedreht wurden (praktisch sowas wie Tragflächenverwindung)
welche regler sind da verbaut ?
Bekomme jetzt auch einen mit 10gr. Brushlessmotor.Cooler “Überallmithinnehmflieger”:-))
good
hmm, it’s nice, but way too noisy to call it a glider
ach so super danke. bau nämlich auch eine diskus für den hang.
Hallo!
Nein, fliege ihn nur mit Höhe/Seite!
Querruder anlenken war mir irgendwie doch zu aufwendig
Hallo super minni ding.
Hast du querruder auch angelenkt. wenn ja wie?
Gruß Helmut
Cool!!!
I have two mini discus 2C in my storage, Could you help me saying what configuration have used?
Which..
Motor? Propeller? Battery? Servos? Final weight?
Thanks!
@dustinyeigh i did that with my rustler vxl stock body, i used goof-off and a a clotch and quickly clean all the paint off, it looked funny tho ha
@dustinyeigh Ive been able to.
i have heard that you cant take the paint off the stock body’s is that true ?
@ArchangelCLK Thanks for watching and would love to see the shell redone.
thanks for this, will come in handy jus finished a black skyline r35 and not feeling it, wana redo white, we’ll see
@king14rk Yes, but wash the body agin before you paint.
@RClife24 acetone eats the lexan, probably the absolute worst thing you could have used…
@hasek1616 That doesn’t even have anything to do with this video. lol
can u also do this on original bodys like the ones that come with the car
if u whipe it with brake reisido it willl most liekley leave a film behind and the paint may not sticl to film so i was just wondering not a big problem unless u be and idiot like urself
of course it does you silly twat becuase you WASH IT IN WARM SOAPY WATER! What a dumbass question!
Could you look in the dictionary and find the word “hole”?
could u use this on a hole body ?
will this work on striping the paint off a factory painted shell
yes.
but would the paint stick to that spot again?
could this remove the cloudyness??
cuz i tried to remove the paint with acetone and it left this chalky cloud where the paint was removed.
please help i would really appreciate it. =]
any idea if the novak 4.5t ballistic motor can handle 3s lipo?
Paint thinners will attack the lexan !!! Almost any plastic in fact!
The shell might end up cloudy at best, but it could start to dissolve in places.
Brake fluid should not harm the plastic.
If you have a factory painted shell, you probably will find that the paint won’t come off with brake fluid, but thinners will still attack the plastic!
Some folks say nitro fuel will take paint off, but it won’t work on a factory painted shell.
Go with the break fluid. Thinner does not work on lexan paint.
use brake fluid…it kinda states it specifically in the beginning of the video.
aright I got my savage x 4.6 stock body and I want to remove all the apint off the body what can I do to get it all of will paint thinner work or should I use this?
k thanks was just putting that out there if any1 else was wondering
Yup =)
The Dot 3 will not cloud or crack